FPV-drone GEPRC CineLog20 Analog

GEPRC CineLog20 Analog is a 2-inch FPV drone for hobby, training, sports flights, and video shooting. The model has a compact propeller guard design and can be used indoors or outdoors, provided safe flight conditions are followed.

The drone is equipped with a GEP-F411-35A AIO flight controller based on the MCU STM32F411CEU6, an ICM 42688-P gyroscope, SPEEDX2 1303.5 5500KV motors, 2-inch four-blade Emax propellers, and a Caddx Ratel2 analog camera. Actual flight characteristics depend on the battery, settings, weight of additional equipment, flight style, and conditions of use.

Features

• 2-inch format with a compact propeller guard design.
• FPV camera mount with damping elements to reduce vibration transfer.
• GEP-F411-35A AIO flight controller.
• MCU: STM32F411CEU6.
• Gyroscope: ICM 42688-P.
• Motors: SPEEDX2 1303.5 5500KV.
• Propellers: 2-inch Emax with four blades.
• Caddx Ratel2 analog camera for transmitting a video signal in a compatible FPV system.
• Can be used with compatible mounts for Naked GP, provided the appropriate mounting is used.

Compatibility
Before use, it is necessary to check the drone’s compatibility with the battery, charger, controller, receiver, FPV goggles or monitor, frequency settings, firmware, and additional equipment of the specific configuration.

Package contents
1 x CineLog20 Analog
2 x 2-inch propellers (pair)
1 x Naked GP camera base
2 x Battery mounting straps M15*150 mm
2 x Silicone battery pads
2 x EVA damping landing pads
1 x Screw set
1 x L-shaped hex screwdriver 1.5 mm
1 x Antenna mounting tube
1 x Power cable for Naked GP camera 4S with balance connector
2 x Damping rings for guard
1 x Vertical TBS antenna mount
1 x Horizontal TBS antenna mount
1 x 3D-printed parts for TBS antenna mounting

Screw set includes
3 x Flat head screws M2*12 mm
2 x Round head screws M2*5 mm
1 x Round head screw M2*8 mm with pad
3 x Round head screws M2*7 mm
2 x Round head screws M2*8 mm
2 x Iron nuts M2
1 x Press-fit nut M2