Frame GEPRC GEP-CL20

GEP-CL20 is a 2-inch GEPRC frame for compatible FPV drones. It can be used for building, repairing, or upgrading compact FPV models intended for hobby, training, and sports flights.

The frame design allows the installation of a DJI O3 Air Unit, provided it is compatible with the specific build. The dampened camera mount is used to reduce vibration transfer. Support is also provided for installing compatible Naked GP format cameras, GP 8/9/10/11, Insta360 Go 2, and DJI Action 2.

The distance between the flight controller mounting holes is 25.5 mm x 25.5 mm. The frame supports VTX mounting formats of 20 mm x 20 mm and 25.5 mm x 25.5 mm. The 9 mm x 9 mm motor mounting holes are designed for compatible 12–13 series motors.

Features

• Compact 2-inch design for compatible FPV builds.
• Dampened camera mount to reduce vibration transfer.
• Support for compatible Naked GP, Insta360 Go 2, and DJI Action 2 format cameras, provided the corresponding mount is used.
• 25.5 mm x 25.5 mm mounting holes for the flight controller.
• Support for VTX with 20 mm x 20 mm and 25.5 mm x 25.5 mm mounting holes.
• The external EVA damping ring is used to reduce impact load.

Compatibility
Before assembly, it is necessary to check the frame’s compatibility with the motors, propellers, flight controller, VTX, camera, battery, mounts, and other components of the specific model.

Manual
GEP-CL20 User Manual.pdf

The kit includes:

Carbon:
1 x Main plate: 2.5 mm
1 x Bottom plate: 1.5 mm
1 x Camera mounting plate: 2.0 mm
1 x Motor plate spacer: 2.0 mm

Screw kit:
4 x Self-locking nut M2*1.9-OD4.9, bronze color M2
1 x 7075 aluminum standoff M2*3.5*28
1 x 7075 aluminum standoff M2*3.5*25
1 x Single-sided aluminum standoff M2*3.5*28 with shiny edge
1 x Single-sided aluminum standoff M2*3.5*25 with shiny edge
2 x Round head screw with washer M2*8
18 x Round head screw M2*8
4 x Round head screw M2*5
6 x Round head screw M2*4
10 x Round head screw M2*12
4 x Round head screw M2*16
4 x Pan head screw M1.6*8
18 x Round head screw M2*7
10 x Self-locking nut M2
10 x Nylon nut M2
4 x Nylon standoff M2*5
4 x Rubber damping washer for camera mount
5 x Rubber damping washer for camera mount
4 x Silicone pad for BEC

3D-printed parts:
1 x VTX antenna bracket (large hole)
1 x VTX antenna bracket (small hole)
1 x Receiver mount
1 x Receiver mount
1 x TBS antenna mount
1 x Camera bracket (1 hole)
1 x Camera bracket (2 holes)

Molded plastic parts:
4 x Propeller guard

Other accessories:
1 x Naked Camera GP8 camera base
1 x Power cable for GP camera to 4S with balance connector
2 x Anti-slip pad for battery
2 x Damping pad
4 x EVA damping ring
2 x Receiver antenna tubes 100 mm
2 x Battery strap M15*150
1 x 1.5 mm hex screwdriver
2 x 3M double-sided tape
1 x Keychain