Digital Module Walksnail Avatar VRX

Walksnail Avatar VRX is a digital FPV receiver for the compatible Walksnail Avatar HD system. It is used to receive a digital video signal from a compatible VTX and output the image via HDMI to FPV goggles, a monitor, or another compatible device.

Compact housing

Walksnail VRX weighs 83 g and measures 114x55x22 mm according to the manufacturer. The compact format is suitable for installation on compatible FPV equipment.

Antenna system

Walksnail VRX uses a 4-antenna design, including 2 directional antennas. Actual signal reception quality depends on the compatible VTX, antennas, settings, radio environment conditions, and FPV system configuration.

1080P/60FPS support

Walksnail VRX uses H.265 encoding and supports receiving a video signal with resolution up to 1080p. The average latency of 22 ms is stated by the manufacturer and depends on the operating mode, settings, equipment compatibility, and conditions of use.

HDMI output is used to connect Walksnail VRX to compatible FPV goggles, a monitor, or another display device with an HDMI input.

Canvas mode

OSD display in Canvas mode is supported for compatible systems, including Betaflight, INAV, and KISS, provided the flight controller and video system are configured accordingly.

Compatibility
Before use, it is necessary to check the compatibility of Walksnail VRX with FPV goggles or monitor, HDMI input, power source, antennas, Walksnail Avatar VTX, firmware, and frequency settings of the specific FPV system. Use of FPV equipment must comply with local rules and permitted parameters for radio frequency equipment.

Package contents

• 1 x Avatar VRX
• 2 x RedBird antenna
• 1 x HDMI cable
• 1 x 2-in-1 power cable