VTX BETAFPV M03 5.8G

M03 VTX is a lightweight 5.8 GHz analog video transmitter for compatible whoop FPV drones sized 65-85 mm. It is used to transmit a video signal from the camera during hobby, training, and sports flights, provided it is compatible with the specific FPV system.

Note: The current version of M03 VTX is V1.1.

Features

• Output power can be switched between 25 mW, 100 mW, 200 mW, and 350 mW.
• The weight is 1.1 g, and the compact size is suitable for compatible whoop drones sized 65-85 mm.
• The mounting hole pattern is compatible with BETAFPV micro canopies, provided the appropriate mount is used.
• The JST-0.8 camera connector is compatible with BETAFPV C02, C03, and other cameras with the corresponding connection.
• Comes with an IPX antenna already installed on the video transmitter.
• M03 VTX can be used with compatible 2.4 GHz ELRS FC boards, including F4 1S 5A FC or F4 1S 12A FC, if they support the corresponding connection.

Compatibility
Before installation, it is necessary to check the video transmitter’s compatibility with the flight controller, camera, antenna, power supply, mounting holes, VTX control protocol, and frequency settings. Use of the video transmitter must comply with local rules and permitted parameters for radio frequency equipment.

Diagram
Below is the M03 VTX diagram. The camera connector is JST-0.8 and can be compatible with BETAFPV C01, BETAFPV C02, C03, and NewBeeDrone BeeEye cameras, provided the corresponding connection is used.

Connection to FC
Below is the connection diagram for M03 VTX to the F4 1S 5A FC board (ELRS 2.4 GHz).

Below is the connection diagram for M03 VTX to the F4 1S 12A FC board (ELRS 2.4 GHz).

Band, channel, and power settings
M03 VTX is configured via the SmartAudio port. To change the band, channel, and power, the OSD menu can be used, provided it is compatible with the flight controller. In the OSD menu, go to FEATURES - VTX SA and change the required parameters.

Power can be switched between 25 mW, 100 mW, 200 mW, and 350 mW. In addition to configuration via OSD, power can be changed using the button on the video transmitter.

Below is the frequency table for M03 VTX V1.0 and V1.1.

FAQ
The current version of M03 VTX is V1.1. Different VTX configuration files may be used for versions V1.0 and V1.1, so before configuration, it is necessary to check the board version and select the corresponding configuration file.

Package contents
 1 х BETAFPV M03 5.8G VTX with pre-installed antenna.
 5 х 30AWG silicone wire 30 mm.